We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Aspire Triton Replacement Atomizer Ni 200 Coil
Aspire Triton Replacement Atomizer Ni 200
Aspire Triton Replacement Atomizer Ni 200
Replacement Head
Please note:
To find the ideal temperature range for these coils, we recommend starting out at a lower temperature setting first and gradually increasing it until you find the "sweet spot" for the e-liquid you are using. Please ensure you are in the appropriate TC-Ni mode on your TC mod.
These are temperature sensing coils, and they require the use of a temperature control mod. Make sure that your device is set to the appropriate TC Ni mode when using Ni coils. NEVER use Nickel (Ni) coils with regular Variable Wattage mods, or in Wattage mode. Do NOT use these coils with a mechanical mod, eGo batteries, or any other device which does NOT have a circuit board designed for temperature control. It is for your safety.
Changing the coil on your Atlantis or Triton tank is easy:
Simply unscrew the base of the clearomizer, unscrew the old coil and screw in a new one. Any time you install a fresh coil, make sure to prime it by dripping a few drops of e-juice onto the exposed cotton of the coil. Set your clearomizer aside for a few minutes after filling it to allow the new coil to become fully saturated with liquid.
These replacement heads are compatible with the Aspire Atlantis /Atlantis 2 /Atlantis Mega and Aspire Triton / Triton 2 clearomizers.
The coils are made with Nickel (Ni200) wire and are designed to be used with Temperature Control devices only.
The coils feature red o-rings to help differentiate them from regular kanthal coils. They provide clean, pure flavor from your e-liquids and lots of vapor.
Tips:
- The metal tube in the center of this Clearomizer leads from the mouthpiece to the battery end. Avoid getting liquid in this tube when filling the Clearomizer.
- When unfastening the base (atomizer head) to refill the Clearomizer, the seals are temporarily broken and liquid will leak from the mouthpiece or escape into the center tube. Always wrap a cloth or piece of tissue around the mouthpiece when unfastening the base of the Clearomizer.
- Gurgling noise or leaks: This is a sign that liquid has found its way into the metal tube in the center of the Clearomizer (and usually occurs after a refill). Ridding the center tube of liquid will resolve the issue. To do so without emptying the tank, remove the Clearomizer from your device, wrap a cloth or tissue around the lower end of the Clearomizer and blow through the mouthpiece. You can also fire your device for a few seconds without inhaling, to "burn off" excess e-juice from the coil.
- The atomizer head can unfasten when unscrewing the tube or base. Always secure the atomizer head before reinstalling the base of the Clearomizer.
- It is normal to find a small amount of liquid in the contact area of your device when removing the Clearomizer or any atomizer. We recommend cleaning the contact area of your device before charging it.
- When possible, keep the tank full and never below 1/3 full of eLiquid ("topped off"). This helps maintain the "vacuum" in the tank and prevent leaks.
- The lifespan of your coil depends on usage and the viscosity/type of your e-juice. When the coil head wears down, it may begin to leak, and vapor production begin to noticeably decrease. Replace the atomizer head with a new one if available.
Write Your Own Review