SE-01  Blink Torch

Usefull Applications

•Light Welding   • Plumbing Repairs ,

•Making Jewlery   •Various Crafts & Hobbies ,

•Soldering   •Lighting Cigars  • Making Models

1300- Blue Flame

Adjustable Flame -Butane Refillable

White /White  Blink Torch Special Edition

BLINK TORCH WARNING

* CHILDREN ARE PROHIBITED to Use This Product. Its Contents Are Pressurized And Flammable Articles When In Use .

* DO NOT BURN Continiously For More Than 5 Minutes .

*DO NOT TOUCH Any Part Of the Nozzle While In Use. Allow It To Cool Down Before Handling Again.

* KEEP OUT OF Direct Sunlight For Any Long Term Or Storing It In An Area Over 50° C /122F° .

*USE RECOMMENDED Butane Gas, (Blink Butane ) Otherwise It Is Possible To Break The Lighter Or Shorten The Service Life .

Manufactured For : GREEN PLANET,

INC Riverside , CA 92508

thegreenplanetproducts.com

MADE IN CHINA

SPECIAL EDITION

INSTRUCTIONS

*Please Make Sure The Knob (A) is Turned Completely Clockwise And Then Turn Slightly Counter-clockwise To Open The Value Before Ignition .

*Press And Hold The Button (B) To Ignite The Flame Of The Torch .

*For Continious Flame Without Holding The Button , Slide Switch (C ) Up And Then Release The Button .

* To Adjust The Flame , Turn The Knob (A) Counter-clockwisae For A Larger Flame (+) Or Clockwise For Smaller Flame (-).

*When Torch Is Not In Use , Please Turn The Knob (A) Completely Clockwise For Storage .

* If Your Torch Will Not Ignite , It May Need To Be Refilled . Please Turn Upside Down , Remove Bottom Cap And Refill The Torch With Recommended Butane .

PLEASE READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS BUTANE TORCH

.

1. To Fill Butane Tank, Turn Until Unit Upside Down , Remove Bottom Cap And Firmly valve . The Tank Should Be Filled In 10 Seconds. Please Allow A Few Minutes After Filling For Butane to Stabilize.

2. To Ignite The Butane Torch , Turn The Adjustment Knob Counterclockwise First, Then Press The Ignition Trigger And The Flame Will Ignite .

3. To Keep The Flame Burning , Keep Pressing The Ignition Trigger Continuously Or Slide The Hold Switch Forward.

4. To Adjust The Flame , Turn The Gas Control Knob Clockwise Or Counterclockwise To Decrease The Flame .

.5. To Shut Off The Torch , Press Or Release The Ignition Trigger And The Flame Will Extinguish . Turn The Gas Flow Control Knob Counterclockwise When Not In Use To Completely Turn It Off And Store .